VMware Workstation 5.0 VMware Tools for FreeBSD Guests 1. Power on the virtual machine. 2. Select VM Install VMware Tools. The remaining steps take place inside the virtual machine, not on the host computer. 3. Be sure the guest operating system is running in text mode. You cannot install VMware Tools while X is running.
4. As root ( su -), mount the VMware Tools virtual CD-ROM image, change to a working directory (for example, /tmp), uncompress the installer, then unmount the CD-ROM image. Note: You do not use an actual CD-ROM to install VMware Tools, nor do you need to download the CD-ROM image or burn a physical CD-ROM of this image file. The VMware Workstation software contains an ISO image that looks like a CD-ROM to your guest operating system.
This image contains all the files needed to install VMware Tools in your guest operating system. Note: Some FreeBSD distributions automatically mount CD-ROMs. If your distribution uses automounting, do not use the mount and umount commands below. You still must untar the VMware Tools installer to /tmp. Mount /cdrom cd /tmp Untar the VMware Tools tar file: tar zxf /cdrom/vmware-freebsd-tools.tar.gz umount /cdrom 5. Run the VMware Tools installer. Using the tar installer cd vmware-tools-distrib./vmware-install.pl 6. Log out of the root account. Exit 7. Start X and your graphical environment 8. In an X terminal, launch the VMware Tools background application.
Vmware-toolbox & Note: You may run VMware Tools as root or as a normal user. To shrink virtual disks, you must run VMware Tools as root ( su -). Note: In a FreeBSD 4.5 guest operating system, sometimes VMware Tools does not start after you install VMware Tools, reboot the guest operating system or start VMware Tools on the command line in the guest. An error message appears: Shared object 'libc.so.3' not found. The required library was not installed. This does not happen with full installations of FreeBSD 4.5, but does occur for minimal installations. To fix the problem of the missing library, take the following steps: 1. Insert and mount the FreeBSD 4.5 installation CD or access the ISO image file.
2. Change directories and run the installation script. Cd /cdrom/compat3x./install.sh.
VMware Workstation 5.0 VMware Tools for FreeBSD Guests 1. Power on the virtual machine. 2. Select VM Install VMware Tools. The remaining steps take place inside the virtual machine, not on the host computer. 3. Be sure the guest operating system is running in text mode. You cannot install VMware Tools while X is running. 4. As root ( su -), mount the VMware Tools virtual CD-ROM image, change to a working directory (for example, /tmp), uncompress the installer, then unmount the CD-ROM image.
Note: You do not use an actual CD-ROM to install VMware Tools, nor do you need to download the CD-ROM image or burn a physical CD-ROM of this image file. The VMware Workstation software contains an ISO image that looks like a CD-ROM to your guest operating system. This image contains all the files needed to install VMware Tools in your guest operating system. Note: Some FreeBSD distributions automatically mount CD-ROMs. If your distribution uses automounting, do not use the mount and umount commands below. You still must untar the VMware Tools installer to /tmp.
Mount /cdrom cd /tmp Untar the VMware Tools tar file: tar zxf /cdrom/vmware-freebsd-tools.tar.gz umount /cdrom 5. Run the VMware Tools installer. Using the tar installer cd vmware-tools-distrib./vmware-install.pl 6. Log out of the root account. Exit 7. Start X and your graphical environment 8. In an X terminal, launch the VMware Tools background application. Vmware-toolbox & Note: You may run VMware Tools as root or as a normal user.
To shrink virtual disks, you must run VMware Tools as root ( su -). Note: In a FreeBSD 4.5 guest operating system, sometimes VMware Tools does not start after you install VMware Tools, reboot the guest operating system or start VMware Tools on the command line in the guest. An error message appears: Shared object 'libc.so.3' not found. The required library was not installed. This does not happen with full installations of FreeBSD 4.5, but does occur for minimal installations. To fix the problem of the missing library, take the following steps: 1. Insert and mount the FreeBSD 4.5 installation CD or access the ISO image file. 2. Change directories and run the installation script.
Cd /cdrom/compat3x./install.sh.
VMware Workstation 5.0 VMware Tools for FreeBSD Guests 1. Power on the virtual machine. 2. Select VM Install VMware Tools.
The remaining steps take place inside the virtual machine, not on the host computer. 3. Be sure the guest operating system is running in text mode.
Vmware 5.1
You cannot install VMware Tools while X is running. 4. As root ( su -), mount the VMware Tools virtual CD-ROM image, change to a working directory (for example, /tmp), uncompress the installer, then unmount the CD-ROM image. Note: You do not use an actual CD-ROM to install VMware Tools, nor do you need to download the CD-ROM image or burn a physical CD-ROM of this image file.
Devil May Cry. – Devil May Cry 4 Save Game – Platform: PC – Status: 100% Fear resonates in the underworld as a new protagonist crosses paths with a familiar hero who seemingly. Savegame for Devil May Cry 4 The game passed by 100%! – Successfully complete all – All of the S – Complete all the secret missions – Opened the whole history.
The VMware Workstation software contains an ISO image that looks like a CD-ROM to your guest operating system. This image contains all the files needed to install VMware Tools in your guest operating system. Note: Some FreeBSD distributions automatically mount CD-ROMs. If your distribution uses automounting, do not use the mount and umount commands below. You still must untar the VMware Tools installer to /tmp. Mount /cdrom cd /tmp Untar the VMware Tools tar file: tar zxf /cdrom/vmware-freebsd-tools.tar.gz umount /cdrom 5. Run the VMware Tools installer. Using the tar installer cd vmware-tools-distrib./vmware-install.pl 6. Log out of the root account.
Exit 7. Start X and your graphical environment 8. In an X terminal, launch the VMware Tools background application. Vmware-toolbox & Note: You may run VMware Tools as root or as a normal user. To shrink virtual disks, you must run VMware Tools as root ( su -).
Note: In a FreeBSD 4.5 guest operating system, sometimes VMware Tools does not start after you install VMware Tools, reboot the guest operating system or start VMware Tools on the command line in the guest. An error message appears: Shared object 'libc.so.3' not found. The required library was not installed. This does not happen with full installations of FreeBSD 4.5, but does occur for minimal installations.
To fix the problem of the missing library, take the following steps: 1. Insert and mount the FreeBSD 4.5 installation CD or access the ISO image file. 2. Change directories and run the installation script. Cd /cdrom/compat3x./install.sh.
I suppose this is a silly time to ask this now that I have about a dozen virtualized FreeBSD instances running, but after having one panic this morning in the VMware memory control kernel module, I'm reminded there are probably a few things I've not kept up with since virtualizing a bunch of hosts a few years ago. I'll start with a few things that I believe are correct based on past Googling:. Do not let the VMware tools set the guest's time, use NTP. If using VMware's included tools, ensure that the port is installed. Some older 5.x versions of ESXi have a bug in the HPET timer that will cause your guest to stop moving forward in time (yay PF states that never expire because time has stopped!).
And that's about all I remember. So on to questions:. Use VMware's included tools? And what is the difference?. Use or the kernel module for networking?.
Also, regrading the guest tools, is it OK to be using tools that are ahead of the ESXi host version? And finally, just any best practices you know of if you run lots of VMware-virtualized FreeBSD. Ideally, the VMware Tools version should match what's distributed with your ESX version; Tools shouldn't be newer than your ESX version. When I worked at VMware (2006 to 2009), nearly all of the testing was done with Tools running in the guests, and with the Tools version matching the ESX version. That was the 'beaten path' configuration that was least likely to yield surprises.
This said, very little emphasis was put on testing ESX with guests other than Windows and Linux at the time; 'not sure about today. I am on same boat like you spork. On my scenario I have ESXi free version, no extras features like vMotion, etc. One thing I can share and have read in a lot of tutorials and blogs, is about not using thin disks with ZFS, but no one can explain why. On my setup I make the datasets by hand, so after use GPT on disk, usually I do: dd if=/dev/random of=/dev/adaX bs=4096 For every pool, this avoid the messages about error using encryption the checksums will be ready to use) and will make the thin disk get full.
On my scenario, I use thin to make an vmdk of 2TB, but making the partitions for ZFS I set an low space (around 256 GB). This is for in future. If I need more room, the vmdk is already ready for it (remaining unpartitioned space don't will spend room). About vmware-tools; If you try install them on new Linux versions will get a warning about the indication for use the and then setup exit (on FreeBSD and ESXi 6 this not happen), In my opinion after few tests (cannot be exhaustive because is free version) the vmware-tools are better (installed on old Linux version then did upgrade with tools installed). P.S.: Im using ESXi 6. Ideally, the VMware Tools version should match what's distributed with your ESX version; Tools shouldn't be newer than your ESX version.
When I worked at VMware (2006 to 2009), nearly all of the testing was done with Tools running in the guests, and with the Tools version matching the ESX version. That was the 'beaten path' configuration that was least likely to yield surprises. This said, very little emphasis was put on testing ESX with guests other than Windows and Linux at the time; 'not sure about today.
Apparently, I was finally successful in yelling at them to addressing the tools deficiencies with FreeBSD 10. As of 5.5U2+ you should only use the actual VMware Tools and basically never use. In fact, will make your life miserable these days and little else. Of course, official still requires (seriously guys? Sigh.) But baby steps, right?
Do note that there's a rough patch around 10.1-RELEASE-p8 to p14 or thereabouts where instead of rebooting, the system will hang until watchdog hits. Probably related to a known FreeBSD bug, but it's really unpleasant to deal with in an Ent+ cluster. Resolved in p15+ for sure, never showed up in 9.x.
Note that you may still hit it if you reboot from the OS instead of having tools initiate the reboot. I'm not sure why that is, but I haven't had time to investigate further. Tools initiated works perfectly every time though. Other than that?
Don't use timesync ever, bad things will happen. Otherwise, you really don't need to do anything other than use VMware Tools and VMXNET3 interfaces. I recommend using the LSI SAS for SCSI, but it really doesn't matter. Both will throw the same error if your disks go away unexpectedly. Don't need to worry about setting your clock device any more either. Do note that if you load, you will break migration unless your cluster is in EVC mode or identical hardware. Loading the module is what triggers it; if you do not load the module, you can still migrate from AESNI to non-AESNI processors.
Just adding a found: Testing about think HDs on one datastore and thick provision eager zeroed in another dedicated datastore, maybe I got the point about the recommendation about not use think. On thick vmdks if you rename the vmdk for something else, seems the occult and not documented index by vmware is lost, then esxi start make an flat full file, or in practice, the index works like an point to an compressed file, if index is lost, esxi start decompress the file. Replicating the issue: Make one virtual Machine with 1 TB think HD.
Detach the think HD. Go to directory of the dettached think HD and rename it for other think example: test.vmdk - test.vmdk.other Refresh the folder and then you can see esxi making an full file, from previous example: test-flat.vmdk (1TB uncompressed) Now think about 2 compression working all time. First the ones from thick vmdk, second the other from ZFS if you set it, and then this is why there performance issues. I'm migrating all my thick to an smallest thick provision zeroed, the virtual machines after this migration are running more faster. Do note that there's a rough patch around 10.1-RELEASE-p8 to p14 or thereabouts where instead of rebooting, the system will hang until watchdog hits. Probably related to a known FreeBSD bug, but it's really unpleasant to deal with in an Ent+ cluster.
Resolved in p15+ for sure, never showed up in 9.x. Note that you may still hit it if you reboot from the OS instead of having tools initiate the reboot.
I'm not sure why that is, but I haven't had time to investigate further. Tools initiated works perfectly every time though.
VMware Workstation 5.0 VMware Tools for FreeBSD Guests 1. Power on the virtual machine. 2. Select VM Install VMware Tools. The remaining steps take place inside the virtual machine, not on the host computer. 3. Be sure the guest operating system is running in text mode.
You cannot install VMware Tools while X is running. 4. As root ( su -), mount the VMware Tools virtual CD-ROM image, change to a working directory (for example, /tmp), uncompress the installer, then unmount the CD-ROM image. Note: You do not use an actual CD-ROM to install VMware Tools, nor do you need to download the CD-ROM image or burn a physical CD-ROM of this image file. The VMware Workstation software contains an ISO image that looks like a CD-ROM to your guest operating system. This image contains all the files needed to install VMware Tools in your guest operating system.
Note: Some FreeBSD distributions automatically mount CD-ROMs. If your distribution uses automounting, do not use the mount and umount commands below. You still must untar the VMware Tools installer to /tmp. Mount /cdrom cd /tmp Untar the VMware Tools tar file: tar zxf /cdrom/vmware-freebsd-tools.tar.gz umount /cdrom 5. Run the VMware Tools installer. Using the tar installer cd vmware-tools-distrib./vmware-install.pl 6. Log out of the root account. Exit 7. Start X and your graphical environment 8. In an X terminal, launch the VMware Tools background application.
Vmware-toolbox & Note: You may run VMware Tools as root or as a normal user. To shrink virtual disks, you must run VMware Tools as root ( su -). Note: In a FreeBSD 4.5 guest operating system, sometimes VMware Tools does not start after you install VMware Tools, reboot the guest operating system or start VMware Tools on the command line in the guest. An error message appears: Shared object 'libc.so.3' not found. The required library was not installed. This does not happen with full installations of FreeBSD 4.5, but does occur for minimal installations.
Vmware Esxi Free
To fix the problem of the missing library, take the following steps: 1. Insert and mount the FreeBSD 4.5 installation CD or access the ISO image file. 2. Change directories and run the installation script. Cd /cdrom/compat3x./install.sh.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |