Microsoft Connect Has Been Retired. 6 minutes to read. Contributors. In this article You have reached this page because you’ve tried to access the Microsoft Connect portal. After nearly 10 years, Microsoft Connect has been retired in favor of new tools and services that will continue to allow you to engage with Microsoft. If you are a member of an active Connect program, your program has either closed or moved to one of these tools or services.
Make Executable Jar
Identify your program below to get status and next steps. Programs Moving to Windows EEAP (Connect Site ID 1304) The EEAP program is now hosted on. By now, all companies targeted for participation in the EEAP for 2018 have been notified of the move to Collaborate and given instruction on how to register. If you do not have access to Collaborate and believe you should, please contact your Microsoft engagement owner. Windows Client and Server TAP (Connect Site ID 997) The Windows Client and Server TAP programs are now hosted on.
Contact [email protected] if you have not registered. Security Update Validation Program - SUVP (Connect Site ID: 6) The Security Update Validation Program (SUVP) is now hosted on.
If you have any questions about your program membership or access to Collaborate, please contact [email protected]. Microsoft Custom Support (Connect Site ID 83) Microsoft Custom Support is now hosted on. All users that were on Connect should have received instructions on how to access the program. If you have any questions or issues, please start with your TAM. Microsoft Microsoft PlayReady Support Microsoft Microsoft PlayReady Support for licensed companies is now hosted on. All users that were on Connect should have received instructions by email on how to access the Collaborate Portal. If you have any questions or issues, please read the instructions or email [email protected].
Microsoft Dynamics 365 (Connect Site ID 687) The Dynamics 365 Finance & Operations, Business Edition team now uses for early engagement programs. Please email [email protected] and request for information on how to get on-boarded to the Microsoft Collaborate tool to participate in the Ready! NOTE: Please see the “Programs Moving to Other Tools” section below for “Dynamics AX Feedback (Connect Site ID 13211)” covering “Dynamics 365 for Finance and Operations, Enterprise Edition team content and updates.” Designed for XBOX (Connect Site ID 1314) The Designed for XBOX program is now hosted on Microsoft Collaborate. If you have any questions about your program membership or access to Collaborate, please contact [email protected]. Designed for Surface (Connect Site ID 1342) The Designed for Surface program is now hosted on Microsoft Collaborate. If you have any questions about your program membership or access to Collaborate, please contact [email protected]. Skype Business Services (Connect Site ID 355) The Skype Business Services program is now hosted on.
If you have any questions about your program membership or access to Collaborate, please contact the program administrators. Microsoft Auto (Connect Site ID 383) The Microsoft Auto program is now hosted on. If you have any questions about your program membership or access to Collaborate, please contact [email protected]. StorSimple Partners (Connect Site ID 1328) The StorSimple Partners program is now hosted on. If you have any questions about your program membership or access to Collaborate, please contact the program administrators.
Microsoft Learning Experiences - SME Program / LEX Content development (Connect Site ID 862) The LEX Content Development program is now hosted on. If you have any questions about your program membership or access to Collaborate, please contact [email protected]. Office PIPC (Connect Site ID 846) The Office PIPC program is now hosted on. If you have any questions about your program membership or access to Collaborate, please contact the program administrators. Fast (Connect Site ID 898) The Fast program is now hosted on. If you have any questions about your program membership or access to Collaborate, please contact [email protected]. WARP (Connect Site ID 1388) The WARP program is now hosted on.
If you have any questions about your program membership or access to Collaborate, please contact [email protected]. EWARP (Connect Site ID 1398) The eWARP program is now hosted on. If you have any questions about your program membership or access to Collaborate, please contact [email protected]. Microsoft Office (Connect Site ID 160) The Microsoft Office program is now hosted on. If you have any questions about your program membership or access to Collaborate, please contact [email protected].
Azure Active Directory Connection (Connect Site ID 1164) The Azure Active Directory Connection program is now hosted on. If you have any questions about your program membership or access to Collaborate, please contact the program administrators. Programs Moving to Other Tools SQL Server (Connect Site ID 68) Effective January 1, 2018, the community feedback feature of the Microsoft Connect site for SQL Server has been replicated in for the convenience of the community. We have captured all current/active public feedback for SQL Server that was entered into Microsoft Connect and transferred it into the new forum to help customers find relevant and active matching suggestions. System Center Configuration Manager and Microsoft Intune (Connect Site ID 892).
If you have a feature request for Configuration Manager or Intune, UserVoice is still the best place for feature requests: and. If you want to file a bug against Configuration Manager, please use the Windows Feedback Hub, which is built into the Windows 10 operating system. For more information, see. You can track the status of new bugs filed in Feedback Hub, but not bugs previously filed under Connect; all bugs filed under Connect are still accessible by the product team. If you think you’ve found a bug with Intune, please open a support case. For more information, see.
If you are part of the Customer Connection Program and are trying to access content from the Configuration Manager or Intune Advisors calls, please contact your Customer Connection Program contact to get access to the new TechCommunity. If you are a Partner, please contact your Partner contact. If you are trying to get access to content for the Technical Adoption Program (TAP) please contact your TAP buddy.
NMAKE option macros targets @CommandFile Nmake.exe builds only specified targets or, if none are specified, the first target in the.mak file. The first.mak file target can be a pseudotarget that builds other targets. Nmake.exe uses.mak files specified with /F; if /F is not specified, it uses the.mak file in the current directory. If no.mak file is specified, Nmake.exe uses inference rules to build command-line targets. The CommandFile text file contains command-line input.
Other input can precede or follow @ CommandFile. A path is permitted. In CommandFile, line breaks are treated as spaces. Enclose macro definitions in quotation marks (' ') if they contain spaces. Nmake.exe options are preceded by either a slash mark (/) or a hyphen (-) and are not case-sensitive. Use!CMDSWITCHES to change option settings in a.mak file or in Tools.ini. The following table shows available Nmake.exe options.
Option Description /A Forces a build of all evaluated targets, even if the targets are not out-of-date with respect to dependents. Does not force a build of unrelated targets. /B Forces a build even if the time stamps are equal. Recommended only for very fast systems with a resolution of two seconds or less. /C Suppresses default output, including nonfatal Nmake.exe errors or warnings, time stamps, and the Nmake.exe copyright message.
Suppresses warnings issued by /K. /D Displays the time stamps of each evaluated target and dependent and a message when a target does not exist. Useful with /P for debugging a.mak file. Use!CMDSWITCHES to set or clear /D for part of a.mak file.
/E Causes environment variables to override.mak file macro definitions. /F filename Specifies filename as a.mak file. Spaces or tabs can precede filename. Specify /F once for each.mak file.
To supply a.mak file from standard input, specify a hyphen (-) for filename. To end keyboard input, press F6 or CTRL+Z. Displays a brief summary of Nmake.exe command-line syntax. /I Ignores exit codes from all commands.
To set or clear /I for part of a.mak file, use!CMDSWITCHES. To ignore exit codes for part of a.mak file, use a hyphen (-) command modifier. Overrides /K if both are specified. /K Continues building unrelated dependencies, if a command returns an error.
Also issues a warning and returns an exit code of 1. By default, Nmake.exe stops if any command returns a nonzero exit code. Warnings from /K are suppressed by /C. /I overrides /K if both are specified. /N Displays, but does not execute, commands. Preprocessing commands are executed.
Does not display commands in recursive Nmake.exe calls. Useful for debugging.mak files and checking time stamps.
To set or clear /N for part of a.mak file, use!CMDSWITCHES. /NOLOGO Suppresses the Nmake.exe copyright message. /P Displays information, such as macro definitions, inference rules, targets, and.SUFFIXES list, to standard output, and then runs the build. Microsoft office outlook credentials prompt. If no.mak file or command-line target exists, it displays information only.
I would like to get pdf on engineering physics pk palanisamy. Oct 30, 2014 Physics Pk Palanisamy Pdf for accessing your smartphone app. When started, you'll find. Exclusivity: While only attack at least. Compared to extract. Engineering physics by pk palanisamy.pdf FREE PDF DOWNLOAD NOW!!! Source #2: engineering physics by pk palanisamy.pdf FREE PDF DOWNLOAD. Save this Book to Read engineering physics by pk palanisamy PDF eBook at our Online Library. Get engineering physics by pk palanisamy PDF file for free from our. Engineering physics palanisamy pdf. Read and Download PDF Ebook engineering physics by pk palanisamy at Online Ebook Library. Get engineering physics by pk palanisamy PDF.
Use with /D to debug a.mak file. /Q Checks the time stamps of targets, but does not run the build. Returns a zero exit code if all targets are up-to-date and a nonzero exit code if any target is not up-to-date. Preprocessing commands are executed.
Useful when running Nmake.exe from a batch file. /R Clears the.SUFFIXES list and ignores inference rules and macros that are defined in the Tools.ini file or that are predefined. /S Suppresses the display of executed commands. To suppress the display in part of a.mak file, use the @ command modifier. To set or clear /S for part of a.mak file, use!CMDSWITCHES. /T Updates the time stamps of command-line targets, or the first.mak file target, and executes preprocessing commands, but does not run the build.
/U Must be used in conjunction with /N. Dumps inline Nmake.exe files so that the /N output can be used as a batch file. /X Sends Nmake.exe error output to filename instead of to a standard error output.
Spaces or tabs can precede filename. To send standard error output, specify a hyphen (-) for filename. Does not affect output from commands to standard error output.
/Y Disables batch-mode inference rules. When this option is selected, all batch-mode inference rules are treated as regular inference rules. Nmake.exe reads Tools.ini before it reads.mak files, unless /R is used. It looks for Tools.ini first in the current directory and then in the directory specified by the INIT environment variable. The section for Nmake.exe settings in the initialization file begins with NMAKE and can contain any.mak file information.
Specify a comment on a separate line beginning with a number sign (#). The following table shows Nmake.exe exit codes. Exit code Description 0 No error, but possibly a warning. 1 Incomplete build. This code is issued only when /K is used. 2 Program error, possibly due to one of the following problems:.
A syntax error in the.mak file. An error or exit code from a command. An interruption by the user 4 System error indicating that that the system is out of memory.
255 Target is not up-to-date. This error is issued only when /Q is used. See Also Build Phases Build Tool Last updated on Friday, October 08, 2004 © 1992-2003 Microsoft Corporation.
All rights reserved.
After installing fortran powerstation 4.0, I tested it with the following command 'nmake lname=%1 fc=FL32 ff=-c compile%1.out' and got the warning: missing nmake.err; displaying error numbers without message. Makefile:u1052: Stop. I searched online and found that I might need to install a standalone nmake.exe, which include both nmake.exe and nmake.err. This used to be avilable for download at the Microsoft knowledge base servers ( but the article is now missing. Where can I get a standalone version of nmake.exe? If anyone has other solutions for this warning, please also let me know. Thanks, Yangbin.
To have native tools as nmake 64 bit on Visual Studio Express or 2013 Visual Build 2013 and for Visual Studio 64 bit 2008 cross tools command promt as well. Download 2013 Visual Studio Ultimate update 5 DVD or Web Installer: Install only C Foundation edition from this installer with custom installing. Also remember to use withing visual command; vcvars64.bat in 12/VC/BIN/amd64 to inintialize the PATH= function, if you use, to see if you have it, try to use in Visual 64 bit tools command this command; where nmake.exe If this command does not find nmake.exe and you still have it in amd64 folder. Run this command; in folder Microsoft Visual Studio 12.0 for Micros1.0. Depenidng on if VC12 was installed first, then Micros1.0 can be 2.0. C: progra2 Micros1.0 VC vcvarsall amd64 Having a hard use, make a.bat file for each time loading in windows for own fast start. You have to use cd., to run a.bat not in system32.
The latest version of this topic can be found. The Microsoft Program Maintenance Utility (NMAKE.EXE) is a command-line tool that builds projects based on commands that are contained in a description file. NMAKE is included when you install Visual Studio or the Visual C command-line build tools. It's not available separately. To download and install Visual Studio, see. To install only the command-line tools, download and install. Both installations include 64-bit and 32-bit native command-line tools that target x64, x86, and ARM.
To use NMAKE, you must run it in a command prompt window that has the required paths and environment variables set for the Visual C build tools, libraries, and include files. The easiest way to do this is to run it in a developer command prompt window.
For details on how to open a developer command prompt window, see. If you'd rather customize your own command prompt window, or if you want to use the x64-hosted compilers or build for x64 or ARM targets, see.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |